| After-sales Service: | We Offer After-Sale Service |
|---|---|
| Warranty: | 12 Months or 50000km |
| Type: | Rescue |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier The HOWO 8 Ton Fire Truck is an exceptional vehicle engineered for rapid and effective emergency response. Featuring a robust engine and an impressive 8-ton capacity, this fire truck is fully equipped to tackle even the most demanding firefighting challenges. It comes outfitted with cutting-edge firefighting apparatus, including high-performance water hoses, powerful pumps, and ample storage compartments for all essential tools and gear. This advanced vehicle combines sophisticated technology with rugged durability, making it an invaluable asset for any fire department or emergency response team. Rely on the HOWO 8 Ton Fire Truck to provide unparalleled performance and safety when it's needed the most.
| Vehicles Parameters | |||||||
| Dimensions | Length/mm | 9870 | |||||
| Width/mm | 2500 | ||||||
| Height/mm | 3690 | ||||||
| Wheelbase/mm | 4350+1300 | ||||||
| Front/Rear Thread/mm | 1835/1640 | ||||||
| Approach/Departure Angle/° | 20/13 | ||||||
| Front/Rear Overhang/mm | 1180/1715 | ||||||
| Chassis | Brand | HOWO | |||||
| Driven Mode | 4x2, Left Hand Drive/Right Hand Drive | ||||||
| Front Axle Load/kg | 7000 | ||||||
| Rear Axle Load/kg | 11000 | ||||||
| Braking System | Air Break | ||||||
| Tyre | 12R22.5, 10 pcs and one spare | ||||||
| Gear Box | 9 forwards 2 backward | ||||||
| Max Speed/ km/h | 105 | ||||||
| Beam | 140mm Cross Beam | ||||||
| Cab | 3+3 passengers | ||||||
| Engine | Model | WeiChai | |||||
| Horsepower/HP | 280 | ||||||
| Displacement/L | 8.9 | ||||||
| Max Torque | 650N·m | ||||||
| Speed at Max Torque/rpm | 1500 | ||||||
| Fire Fighting System | |||||||
| Fire Pump | Model | CB10/40 | |||||
| Flow/ L/s | 40 | ||||||
| Pressure/MPa | 1.0 | ||||||
| Water Suction Time/s | Less than 35(when height is 7m) | ||||||
| Installation Mode | Rear-mounted | ||||||
| Fire Monitor | Model | PS40 | |||||
| Pressure/MPa | 1.0 | ||||||
| Flow/ L/s | 40 | ||||||
| Range/m | More than 60 | ||||||
| Horizontal Rotating Angle/° | 360 | ||||||
| Pitching Rotating Angle/° | -30~80 | ||||||
| Operation Mode | Manual | ||||||
| Pipeline Systems | Internal Inflow Pipe | One pc φ125mm pipe with one pc φ125mm flygate | |||||
| External Inflow Pipe | Installed behind the pump, φ125mm, with 4 pcs 2m water suction pipes | ||||||
| Water Outlet Pipe | -Installed behind the pump, 2 pcsφ80mm constant pressure ball valves and 2 pcs φ65mm medium pressure ball valves -One pc φ80mm gun pipe with φ80mm flexible joints, controlled by a φ80mm ball valve |
||||||
| Water Injection Pipe | -One pc φ50mm internal water injection pipe -One pc φ65mm external water injection pipe |
||||||
| Cooling Water Pipe | Equipped with stainless steel ball valve | ||||||
| Drain Pipe | In the lowest position of the pipe | ||||||
| Water Tank | Loading Capacity/kg | 8000 | |||||
| Material | Quality Carbon Steel Plate | ||||||
| Thickness | Baseboard and Endplate: 4mm Side plate and top plate: 3mm |
||||||
| Structure | Welded Type, Anti-swing Plate Inside -One Manhole, with fast lock & unlock device -One Overflow Device -One Level Indication Device -One Drain Hole, controlled by manual valve |
||||||
| Electrical System | -Above the driving room are lightbar & 12V/60W fire scene light -Above both sides of the vehicle are two flash lights -100W alarm light -Switches of all the lights, alarms and pumps on the control panel. |
||||||
| Foam Tank | Structure | Connected | |||||
| Capacity/kg | 2000 | ||||||
| Material | Quality | ||||||
| Base: Side Plate: Anti-swing Plate | 4:4:3 | ||||||
| Other Detail |
-One Manhole, with fast lock & unlock and pressure-release device -One Overflow Device: DN50mm -One Drain Hole with ball valve: DN40 |
||||||
| Powder Cylinder | Power System | Including Pressed Nitrogen and Burned Gas | |||||
| Capacity/kg | 2000 | ||||||
1. Professional Technology
We are proud to have a dedicated R&D Team with over three decades of expertise in the automotive industry.
2. Superior Quality
With cutting-edge production equipment and a rigorous quality inspection team, we ensure that you receive top-tier vehicle products.
3. Competitive Pricing
We provide competitive pricing without compromising on quality.
4. Exceptional Service
Our 24/7 online service is available to address all your pre-sale and after-sale inquiries. We also offer extended warranties for added peace of mind.
5. Prompt Delivery
Whether it's peak season or off-season, we guarantee timely delivery of your vehicle products, with faster delivery in the off-season.
6. Strong Capabilities
With a total investment of 1 billion RMB and a sprawling 350,000 square meter factory, our company's annual sales of vehicle products reach an impressive 2 billion RMB.
Expert Pre-Sales Guidance
1. Complimentary Pre-Sales Consulting
2. Access to Free Videos and Image Resources
3. Detailed Technical Information Available
4. Cost-Effective Progression Solutions Offered
Exceptional After-Sales Support
1. Comprehensive Technical Support via Email, Video, or Call
2. Lifetime Maintenance and Spare Parts Supply
3. Complimentary Training for Installation and Operation
4. Rapid 12-Hour Response to Minimize Losses
1.Q:Are you a factory or a trade company?
A: We are a leading manufacturer of pressure vessels, bobtails, trailers, trucks, skid-mounted stations, and spare parts. We warmly welcome you to visit us in Suizhou City, the heart of China's special purpose vehicle production.
2. Q: Where is your factory located?
A: Our factory is located in Suizhou City, Hubei Province, China.
3.Q:How can I visit there?
A: We are delighted to welcome you for an inspection at our factory. You can fly into Wuhan Tianhe Airport, where we will arrange for a special car to transport you directly to our facility.
4.Could you customize exactly according to my requirements?
A: Absolutely. Our professional R&D team is equipped to tailor products precisely to your specifications.
5.Q: Do you provide the certifications that we need?
A: Yes, we can provide various certifications such as BV, DOT, ADR, SASO, and more.
6.Q: What are your payment terms?
A: We prefer T/T and L/C.
7.Q:Do you arrange shipment for the vehicles?
A: Yes, we can arrange shipment based on agreed trade terms.
8. Q: What service can I get from you?
A: We offer lifetime tracking service and a one-year free warranty on all our products. Additionally, we provide free training and technical support to assist you in repairing your product. If needed, we will also send original spare parts free of charge via air freight.
9.Q:How is the packing?
A: All our packaging complies with export standards.
10.Q:How long is the lead time?
A: The lead time ranges from 7 to 25 working days.
For other questions, we will respond promptly after receiving your inquiry!
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}