| After-sales Service: | We Offer After-Sale Service |
|---|---|
| Warranty: | 12 Months or 50000km |
| Type: | Rescue |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier The HOWO 8 Ton Fire Truck is your go-to solution for emergency response, combining reliability and efficiency to meet the demands of critical situations. Boasting a robust engine and an impressive 8-ton capacity, this versatile fire truck is fully equipped to tackle the toughest firefighting challenges. It comes loaded with cutting-edge firefighting equipment, such as high-performance water hoses, powerful pumps, and spacious storage compartments for all essential tools and gear. Engineered with the latest technology and built for durability, the HOWO 8 Ton Fire Truck is an indispensable asset for any fire department or emergency response team. Rely on the unmatched performance and safety of the HOWO 8 Ton Fire Truck when every second counts.
| Vehicles Parameters | |||||||
| Dimensions | Length/mm | 9870 | |||||
| Width/mm | 2500 | ||||||
| Height/mm | 3690 | ||||||
| Wheelbase/mm | 4350+1300 | ||||||
| Front/Rear Thread/mm | 1835/1640 | ||||||
| Approach/Departure Angle/° | 20/13 | ||||||
| Front/Rear Overhang/mm | 1180/1715 | ||||||
| Chassis | Brand | HOWO | |||||
| Driven Mode | 4x2, Left Hand Drive/Right Hand Drive | ||||||
| Front Axle Load/kg | 7000 | ||||||
| Rear Axle Load/kg | 11000 | ||||||
| Braking System | Air Break | ||||||
| Tyre | 12R22.5, 10 pcs and one spare | ||||||
| Gear Box | 9 forwards 2 backward | ||||||
| Max Speed/ km/h | 105 | ||||||
| Beam | 140mm Cross Beam | ||||||
| Cab | 3+3 passengers | ||||||
| Engine | Model | WeiChai | |||||
| Horsepower/HP | 280 | ||||||
| Displacement/L | 8.9 | ||||||
| Max Torque | 650N·m | ||||||
| Speed at Max Torque/rpm | 1500 | ||||||
| Fire Fighting System | |||||||
| Fire Pump | Model | CB10/40 | |||||
| Flow/ L/s | 40 | ||||||
| Pressure/MPa | 1.0 | ||||||
| Water Suction Time/s | Less than 35(when height is 7m) | ||||||
| Installation Mode | Rear-mounted | ||||||
| Fire Monitor | Model | PS40 | |||||
| Pressure/MPa | 1.0 | ||||||
| Flow/ L/s | 40 | ||||||
| Range/m | More than 60 | ||||||
| Horizontal Rotating Angle/° | 360 | ||||||
| Pitching Rotating Angle/° | -30~80 | ||||||
| Operation Mode | Manual | ||||||
| Pipeline Systems | Internal Inflow Pipe | One pc φ125mm pipe with one pc φ125mm flygate | |||||
| External Inflow Pipe | Installed behind the pump, φ125mm, with 4 pcs 2m water suction pipes | ||||||
| Water Outlet Pipe | -Installed behind the pump, 2 pcsφ80mm constant pressure ball valves and 2 pcs φ65mm medium pressure ball valves -One pc φ80mm gun pipe with φ80mm flexible joints, controlled by a φ80mm ball valve |
||||||
| Water Injection Pipe | -One pc φ50mm internal water injection pipe -One pc φ65mm external water injection pipe |
||||||
| Cooling Water Pipe | Equipped with stainless steel ball valve | ||||||
| Drain Pipe | In the lowest position of the pipe | ||||||
| Water Tank | Loading Capacity/kg | 8000 | |||||
| Material | Quality Carbon Steel Plate | ||||||
| Thickness | Baseboard and Endplate: 4mm Side plate and top plate: 3mm |
||||||
| Structure | Welded Type, Anti-swing Plate Inside -One Manhole, with fast lock & unlock device -One Overflow Device -One Level Indication Device -One Drain Hole, controlled by manual valve |
||||||
| Electrical System | -Above the driving room are lightbar & 12V/60W fire scene light -Above both sides of the vehicle are two flash lights -100W alarm light -Switches of all the lights, alarms and pumps on the control panel. |
||||||
| Foam Tank | Structure | Connected | |||||
| Capacity/kg | 2000 | ||||||
| Material | Quality | ||||||
| Base: Side Plate: Anti-swing Plate | 4:4:3 | ||||||
| Other Detail |
-One Manhole, with fast lock & unlock and pressure-release device -One Overflow Device: DN50mm -One Drain Hole with ball valve: DN40 |
||||||
| Powder Cylinder | Power System | Including Pressed Nitrogen and Burned Gas | |||||
| Capacity/kg | 2000 | ||||||
1. Professional Expertise
Our dedicated R&D Team boasts over 30 years of pioneering experience in the automotive sector.
2. Superior Quality
Equipped with state-of-the-art production facilities, we uphold rigorous quality inspections to ensure you receive only the finest vehicle products.
3. Competitive Pricing
We provide highly competitive pricing without compromising on quality.
4. Exceptional Service
Our 24/7 online customer service is always available to address your pre-sale and post-sale inquiries. We also offer extended warranty periods for your peace of mind.
5. Timely Delivery
Whether it's peak season or off-season, we guarantee timely delivery of your vehicle products, even ahead of schedule during off-peak times.
6. Robust Capabilities
With a total investment of 1 billion RMB, our expansive factory spans 350,000 square meters. Annually, we achieve vehicle product sales amounting to 2 billion RMB.
Pre-sales
1. Free Pre-Sales Consulting - Avail our expert guidance before you invest!
2. Complimentary Videos and Pictures - Visualize your investment with comprehensive media resources.
3. Comprehensive Technical Information - Access all the technical data you need to make an informed decision.
4. Cost-Effective Solutions - We offer tailored solutions to help you minimize costs.
After-sales
1. Full Technical Support - Get expert help via email, video, or call.
2. Lifelong Maintenance & Spare Parts - Enjoy enduring support and parts supply.
3. Complimentary Training - Free installation and operation training.
4. Rapid Response - Quick 12-hour response time to minimize your downtime and losses.
1.Q: Are you a factory or a trade company?
A: We are a leading manufacturer of pressure vessels, bobtails, trailers, trucks, skid-mounted stations, and spare parts. You're warmly invited to visit us in Suizhou City, the heart of China's special-purpose vehicle industry.
2. Q: Where is your factory located?
A: Our factory is situated in Suizhou City, Hubei Province, China.
3.Q: How can I visit your factory?
A: We would be delighted to welcome you for an inspection. Fly into Wuhan Tianhe Airport, and we will arrange a special car to pick you up.
4. Q: Could you customize products exactly according to my requirements?
A: Absolutely. With our professional R&D team, we can produce products tailored specifically to your requirements.
5.Q: Do you provide the certifications we need?
A: Yes, we can provide a range of certifications including BV, DOT, ADR, SASO, and more.
6.Q: What are your payment terms?
A: We prefer T/T and L/C payment methods.
7.Q: Do you arrange the shipment for the vehicles?
A: Yes, we can arrange shipment based on the agreed trade terms.
8. Q: What services can I expect from you?
A: We offer lifelong tracking service and a one-year free warranty for all our products. Additionally, we provide free training and technical support to assist you with repairs. If necessary, we can send original spare parts free of charge by air.
9.Q: How is the packing done?
A: All our packaging complies with export standards.
10.Q: How long is the lead time?
A: Our lead time ranges from 7 to 25 working days.
For any other questions, we will respond promptly upon receiving your inquiry.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}